Opening Ceremony | July 9 | July 10 | July 11 | July 12 | Posters

Tuesday, July 10, 2007


TimePaper No.Title/SpeakerPresentation
Type


ST7 - Bridging the Gap Between Research and Standards


8:00: AMTPL-1Bridging the Gap Between Research and Standards
R.D. Hooton

Plenary Lecturer

ST1 - Hydration Chemistry and Structure of Cement Systems


4:00: PMTPL-2Hydration Chemistry and Structure of Cement Systems
I. Richardson, H. Van Damme

Plenary Lecturer

ST1 - Hydration Chemistry and Structure of Cement Systems

T1-03   Water/Cement System Interactions


1:30: PMT1-03.1Unifying Autogeneous and Drying Shrinkage of Cement Paste by the Use of Isothermal Sorption/Desorption Curves
J-Ph. Thierry, G. Chanvillard

Oral
1:50: PMT1-03.2Influence of Alkali Chloride on Surface Properties and Solubility of C-S-H
P. Henocq, J. Marchand, E. Samson

Oral
2:10: PMT1-03.3States of Water in Hydrated Cement Paste: Powers and Brownyard Revisited
R.A. Livingston, N.M. Nemes, D.A. Neumann

Oral
2:30: PMT1-03.4The Role of Water During Setting and Hardening of Tricalcium Silicate Paste
M.W. Grutzeck, B. O'Hare, R.A. Steinle, A. Benesi

Oral
2:50: PMT1-03.5Influence of Water Chemical Potential on the Phase Assemblages of the CaO-Al2O3-CaSO4-H2O System at 25°C
D. Damidot, B. Albert, B. Guy

Oral
3:10: PMT1-03.6The Phase Transformation of Calcium Sulphate Sub-Hydrates Reacting with Water
C. Pritzel, R. Trettin

Oral

T1-04   Microstructure of Cement Paste Systems II


10:00: AMT1-04.1Phosphorus Effect on Physical and Mechanical Properties: Relation between Clinker Microstructure and Hydration
E. Moudilou, F. Amin, B. Bollotte, J.H. Thomassin, P. Le Coustumer, Y. Lefrais

Oral
10:20: AMT1-04.2Investigations Into the Microstructure of Fresh Portland Cement Mortar
K.O. Kjellsen, S. Diamond

Oral
10:40: AMT1-04.3Study of the Influence of Soluble Ions on Morphological and Microstructural Properties of Synthetic Ettringite
A. Lo Presti, G. Artioli, A. Bravo, F. Cella, T. Cerulli, M. Magistri

Oral
11:00: AMT1-04.4Microstructure Development in Calcium Aluminate Cement - Fly Ash Mixes
A. Hidalgo, M.C. Alonso, J.L. García, S. Petit, L. Fernández Luco, C. Andrade

Oral
11:20: AMT1-04.5Structure Analysis of Glass of CaO-Al2O3-SiO2 System by Means of NMR
S. Goto, H. Fujimori, T. Tsuda, K. Ooshiro, S. Yamamoto, K. Ioku

Oral

ST2 - Characterization Techniques

T2-03   Physical Properties of Cement Systems II


10:00: AMT2-03.1Rheology of Penetrations Tests I: Theory and Finite Element Simulations
R.J. Flatt, D. Lootens, N. Roussel, P. Jousset

Oral
10:20: AMT2-03.2Ultrasonic Monitoring of Setting and Hardening Behaviour of Concrete and Mortar with Blast Furnace Slag Cement
N. Robeyst, E. Gruyaert, N. De Belie

Oral
10:40: AMT2-03.3Quantitative Morphological Characterization of Cement Particles of Different Milling Systems and its Relationship with Physical Properties of Cements
P.K. Panigrahy, M. Medhe, R.M. Sahu, S.P. Pandey, A.K. Chatterjee

Oral
11:00: AMT2-03.4Intrinsic Elastic Properties of Calcium Silicate Hydrates by Nanoindentation
E. Lesniewska, C. Plassard, I. Pochard, A. Nonat

Oral
11:20: AMT2-03.5Rheology of Penetrations Tests II: Penetrometers, Vicat and Hilti Needles
D. Lootens, N. Roussel, R.J. Flatt

Oral

T2-04   Novel Characterization Techniques


1:30: PMT2-04.1Test Method for Determining Coefficient of Thermal Expansion of High-Performance Concrete at Early Age
D. Cusson, T. Hoogeveen

Oral
1:50: PMT2-04.2Hexagonal or Trigonal Structure of Ettringite Revisited by Raman Spectroscopy
G. Renaudin, R. Segni, F. Leroux, C. Taviot-Gueho

Oral
2:10: PMT2-04.3Tricalcium Silicate Hydration Studied Using Quasielastic Neutron Scattering: Insights on the Effects of Sucrose
V.K. Peterson, M.C. Garci-Juenger

Oral
2:30: PMT2-04.4Comparison Between NMR Non Destructive Method and Common Invasive Methods Used for Concrete Structuration Evolution
J. Magat, S. Care, P. Faure, T. Chaussadent

Oral
2:50: PMT2-04.5Recent Progress in Solid-State NMR of Quadrupolar Nuclei. Application to the Characterization of Hydration and Sulfate Attack Products
J.-B. d'Espinose De Lacaillerie, F. Barberon, C. Lenain, Z. Gan

Oral

ST3 - Sustainable Development and Climate Change Initiatives

T3-05   Clinker Production: Alternative Fuels and Natural Raw Materials


10:00: AMT3-05.1Effect of Fluxes and Mineralizers in Clinkerization of High Sulphur Cement Raw Mix
H.U. Shah, Z. Din, N.A. Qureshi, A. Bashir

Oral
10:20: AMT3-05.2Theoretical Evaluation on Possibility of Using Basaltoid as Aluminosilicate Component in Raw Mix for Portland Cement Clinker Synthesis
R. Sanjaasuren, Ts. Erdenebat, P.F. Rumyantsev

Oral
10:40: AMT3-05.3Incorporating Paint Sludge in the Manufacture of OPC Clinker. Part I: The Effect on Burnability
J.H. Potgieter, S.S. Potgieter-Vermaak

Oral
11:00: AMT3-05.4The Effect of Sulfur to Alkali Ratio on Clinker Properties
S. Plang-Ngern, M. Rattanussorn

Oral
11:20: AMT3-05.5Use of 100% Unconventional Fuel in Cement Kiln - A Case Study
M.K. Mukherjee, M.M. Tiwari

Oral
11:40: AMT3-05.6Influence of Using Meat and Bone Meal as an Alternative Fuel on Formation and Properties of Portland Cement Clinker
D.C. Nastac, M. Hupa, M. Muntean

Oral

T3-06   Supplementary Cementing Materials: Slag


1:30: PMT3-06.1Alkali-Activated Carbonatite and Slag Composite Cementitious Materials
Q.J. Yu, S.Y. Zhao, F. Qiao, X.G. Zhao, S.H. Yin, Z.Y. Wen

Oral
1:50: PMT3-06.2ZEWA (Zero waste) Process: A New Way for Co-Processing Steel Slag
F.P. Sorrentino, M. Gimenez

Oral
2:10: PMT3-06.3Waste Gypsum-Activated Blast Furnace Slag Composites: Effect of Aggregate Type on Strength Development
R. X. Magallanes-Rivera, J.I. Escalante-Garcia, A. Gorokhovsky

Oral
2:30: PMT3-06.4An Investigation on Enhancing Blast Furnace Slag Content in Portland Slag Cement through Alkali Activation
S.B. Hegde, P. Chelladurai

Oral
2:50: PMT3-06.5Influence of the Type and Concentration of Sodium Alkaline Activator on the Hydration Process of Blast Furnace Slag
J. Deja

Oral
3:10: PMT3-06.6Alkali-Activated Slag Concrete Development and their Practical Use
V. Bilek, M. Urbanova, J. Brus, D. Kolousek

Oral

T3-07   Interactions with Heavy Metals: Clinkering


1:50: PMT3-07.2The Use of Blast Furnace Slag to Decrease Heavy Metals from Electric Arc Furnace Dust Leachate: a Column Leaching Test
G. Laforest, J. Duchesne

Oral
2:10: PMT3-07.3Behavior of Lead and Chromium Ions as Toxic Heavy Metals Between AFt and AFm Phases Based on C3A and C4A3S
T.H. Ahn, C.P. Wreden

Oral
2:30: PMT3-07.4Influence of Zn(II) ions on the Hydration of Calcium Sulfoaluminate Cement - Application to Nuclear Waste Conditioning
C. Cau Dit Coumes, S. Courtois, N. Malassagne, N. Benameur

Oral
2:50: PMT3-07.5Stabilisation of Electric Arc Furnace Dust by Cementitious Materials: Influence of pH
G. Laforest, J. Duchesne

Oral

T3-08   Supplementary Cementing Materials: Geopolymers


10:00: AMT3-08.1Immobilization of Cesium in Geopolymeric Matrix: A Formulation Study
V. Fournel, C. Cau-Dit-Coumes, S. Berger, F. Frizon

Oral
10:20: AMT3-08.2Alkali Activation of 'Pozzolan-Calcium Aluminate Cement' Mixtures
L. Fernández-Carrasco, A. Palomo, A. Fernández-Jiménez

Oral
11:00: AMT3-08.4Characterization of Geopolymer Cements and Concretes: Structure/Property Relations and Commercial Utilization
J.S.J. Van Deventer, J.L. Provis, P. Duxson, C.A. Rees, G.C. Lukey

Oral
11:20: AMT3-08.5New Clinker Formulations Made of Industrial Wastes
J.A. Labrincha, F. Raupp-Pereira, A.M. Segadães

Oral

ST4 - Durability and Degradation of Cement Systems

T4-04   Corrosion and Chloride Transport


10:00: AMT4-04.1The Key Role of Surface Concentration in the Modelling of Chloride Penetration into Concrete
C. Andrade, M. Castellote, F. Tavares, I. Petre-Lazars, M.A. Climent

Oral
10:20: AMT4-04.2Practical Modeling of Uniform Steel Corrosion in Concrete
O.B. Isgor, P. Ghods, M. Pour-Ghaz

Oral
10:40: AMT4-04.3An Approach for the Physicochemical Modeling of Chloride Ingress into Cementitious Materials
T.Q. Nguyen, P. Dangla, V. Baroghel-Bouny, L. Petit

Oral
11:00: AMT4-04.4Effect of Fly Ash on Chloride Transport through Concrete: Study by Impedance Spectroscopy
I. Sánchez, M.P. López, M.A. Climent

Oral
11:20: AMT4-04.5Influence of Membrane Potential on the Diffusion of Chloride Ion in the Paste
Y. Elakneswaran, T. Nawa, K. Kurumisawa

Oral
11:40: AMT4-04.6Corrosion of Prestressing Steel in High Performance Grouts
M. Serdar, I. Stipanovic, D. Bjegovic

Oral

T4-06   Thaumasite II


1:30: PMT4-06.1The Effect of Mineral Admixtures on Long Term Durability of Limestone Cement Mortars Exposed to Sulfate Attack
S. Tsivilis, A. Skaropoulou, G. Kakali, J.H. Sharp, R.N. Swamy

Oral
1:50: PMT4-06.2A Long Term Study on Thaumasite Form of Sulfate Attack (TSA) in Limestone Cement Pastes
A. Skaropoulou, K. Sotiriadis, G. Kakali, S. Tsivilis

Oral
2:10: PMT4-06.3Thaumasite Formation in Hydrated and Carbonated C3S Pastes
M.T. Blanco-Varela, J. Aguilera, L. Trusilewicz, S. Martinez-Ramirez

Oral
2:30: PMT4-06.4Influence of Cement Types and Mineral Admixtures on the Resistance of Mortar to Thaumasite Form of Sulfate Attack
X.J. Gao, B.G. Ma, H.J. Ba

Oral
2:50: PMT4-06.5The Sulphate Corrosion of Mortars Containing FBC Ash
R. Mroz, M. Gawlicki, J. Malolepszy

Oral

ST5 - Innovations in Cement and Concrete Science

T5-02   Novel Cement Based Products


1:30: PMT5-02.1Study on Properties of 0-3 Cement Based Piezoelectric Composites
C. Xin, H. Shifeng, C. Jun, W. Shoude

Oral
1:50: PMT5-02.2Properties of Cementitious Composites Produced Using Supercritical Carbon Dioxide
E. Farahi, P. Purnell, N.R. Short

Oral
2:10: PMT5-02.3 Macro-Defect-Free Materials: Potential of Portland Cements
M. Drábik, S. Balkovic, P. Martauz, J. Strigá, L. Bágel

Oral
2:30: PMT5-02.4Effects of Different Calcium Sulphates on the Mechanical Properties of a Rapid Setting High Flow Anchoring Grout
C. Pistolesi, C. Maltese, A. Bravo, F. Cella, T. Cerulli, D. Salvioni

Oral
2:50: PMT5-02.5Study on the Manufacture on Self-Leveling Material from Chemical Gypsum
D.X. Li, L.Q. Quan

Oral

ST6 - Rheology and Early-Age Properties of Cement Systems

T6-04   Superlasticizer Issues and Techniques


10:00: AMT6-04.1Influence of Chemical Admixtures on Workability of Lightweight Aggregate Concrete
M.H. Zhang, K.S. Chia

Oral
10:20: AMT6-04.2Incompatibility Problem of Hardening Using Specific Combinations of Chemical Admixtures, Cement and Fly Ash
K. Yamada, K. Wolf, H. Hira

Oral
10:40: AMT6-04.3Strength and Shrinkage Cracking of Portland Cement Mortar Containing Different Superplasticizers
X.G. Wang, B.G. Ma, K. Wang, X.G. Li

Oral
11:00: AMT6-04.4Poly (methacrylic acid) Sodium Salt Interaction with Hydrating Portland Cement
B. Middendorf, N.B. Singh

Oral
11:20: AMT6-04.5Relationship Between Composition of Cement Increased Interstitial Phase Content and the Fluidity of Fresh Cement Paste
E. Maruya, M. Osaki, H. Igarashi

Oral
11:40: AMT6-04.6Determination of the Zeta Potential in Hardened Cementitious Materials by Electro-Osmotic Experiments
M. Castellote, I. Llorente, C. Andrade

Oral

T6-05   Comparative Studies Between Superplasticizers I


1:30: PMT6-05.1Organo-Mineral Phases Formed During Cement Hydration
J. Plank, Z. Dai, H. Keller

Oral
1:50: PMT6-05.2Effectiveness of a New Type Superplasticizer for Ultra Rapid Hardening Cement
A. Ohno, H. Inokawa, H. Kawakami, T. Hirata

Oral
2:10: PMT6-05.3The Influence of Added Sulfates on the Properties of Cement Paste, Mortar and Concrete
N. Zeminian, R. Magarotto, F. Moratti

Oral
2:30: PMT6-05.4Adsorption of Superplasticizers on a Model Powder
Y.F. Houst, P. Bowen, F. Perche

Oral
2:50: PMT6-05.5On Understanding the Dispersion Behaviors of Cement Treated with Dispersants
J.H. Cheung, B.-W. Chun, A. Miller

Oral
3:10: PMT6-05.6Diffusion Behavior of Aluminate and Silicate on the Metakaolin Concrete Adding Various Superplasticizers
T.H. Ahn

Oral

ST7 - Bridging the Gap Between Research and Standards

T7-01   Bridging the Gap Between Research and Standards


10:00: AMT7-01.1Performance Standards - Are we Testing the Right Performance?
P.-C. Aïtcin

Oral
10:20: AMT7-01.2Has the Adoption of the European Cement Specification (EN 197) Improved Cement Consistency in South Africa?
A.W. Walker, M.J. Kearns

Oral
10:40: AMT7-01.3Grouts for Pre-Stressed Structures and Ground Anchors: A Critique of European Standards and Guidelines
J. Tritthart, I. Stipanovic, P.F.G. Banfill

Oral
11:00: AMT7-01.4Verification, Validation, and Variability of Virtual Standards
D.P. Bentz

Oral
11:20: AMT7-01.5Successful Well Cement Standardisation Needs Research Underpinning
J. Bensted, J.S. Lota, J. Munn

Oral






Welcome | ICCC2007 Organization | Conference Management | ICCC2007 Website